联系我们

名称:知名托辊设备加工厂

电话:xxx

手机:xxx

邮箱:xxx

地址:xxx

新闻动态
托辊组合适间距是多少?
托辊组合适间距是多少?
What is the suitable distance of roller combination?
支承托辊组的间距应保证输送带在托辊间所产生的下垂度较小。
The distance between the supporting rollers shall ensure that the sag of the conveyor belt between the rollers is small.
装载处托辊组的间距视物料的密度和粒度而定,密度和粒度越大,间距越小。
The distance between roller groups at loading place depends on the density and particle size of materials. The larger the density and particle size is, the smaller the distance is.
凸弧段托辊组间距定网站建设  伺服液位仪  防撞墙模具 唐山护栏  钢纤维 天津除甲醛  保定铝型材为水平段间距的1/2。
The distance between roller groups in convex arc section is 1 / 2 of that in horizontal section.
头部(装载)滚筒到异地组槽形托辊组的间距为上支承托辊组间距的1~1.3倍,尾部(卸载)滚筒到第一组槽形托辊组的间距不应小于上支承托辊组间距。
The distance between the head (loading) roller and the other group of troughed idlers is 1-1.3 times of the distance between the upper support roller group, and the distance between the tail (unloading) roller and the first group of troughed idlers should not be less than the distance between the upper support roller group.
输送量大于20KG的成件物品,托辊间检查井钢模具 隔离墩模具 隔离墩钢模具 流水槽模具 U型槽模具 螺杆启闭机 卷扬式启闭机 铜雕佛像 距不应大于物品的输送方向上长度的1/2;小于20kg的成件物品,托辊间距可为1m。
The distance between idlers shall not be greater than 1 / 2 of the length in the conveying direction for articles with conveying capacity greater than 20kg; for articles with conveying capacity less than 20kg, the distance between idlers can be 1m.
长度大于50m的输送机,承载段每隔10组托辊设计一组调心托辊组,以防止皮带跑偏。
For the conveyor with a length of more than 50m, a set of self-aligning idlers shall be designed every 10 sets of idlers in the loading section to prevent the belt from running off.

联系方式

  1. 名称:知名托辊设备加工厂
  2. 电话:xxx
  3. 手机:xxx
  4. 邮箱:xxx
  5. 地址:xxx

版权 © 知名托辊设备加工厂 网址:www.tuogunshebei.cn  推荐:托辊设备,托辊机械,托辊生产线

网站建设及优化保定遨游网络公司